HOW WE WORK

From your numbers to a running plant

Buying grain machinery should be straightforward. Here is exactly how an MDT project runs — from the first conversation to a commissioned, running plant.

01

Step 01

Share your requirements

Tell us your crop type, budget
Capacity (tonnes/hour) and site location . Whether it is a single dryer or a full plant — we begin with your numbers.

02

Step 02

We design the plant

Our engineering team produces a custom plant layout, equipment specification, civil requirement drawing and budgetary quote — within 5 working days.

03

Step 03

Manufactured at Tumkur

On approval, all equipment is fabricated and stress-tested at our own Tumkur facility — quality controlled end to end, not outsourced.

04

Step 04

Delivered & installed

Our field team erects and installs the plant on your site, integrating every stage from intake to dispatch.

02

Step 05

Commissioned & handed over

We calibrate, test-run and commission the plant, then hand it over running — with your team shown how to operate it.

03

Step 06

After-sales support

Spare parts, service visits and maintenance support keep your plant running through every harvest season.

WHAT YOU GET

One vendor, start to finish

A single engineering team from design through commissioning
Equipment sized to one throughput — no mismatched machines
Civil and structural guidance alongside the equipment
After-sales service and spare parts.